Symbol LRT 3840 Guía Rápida página 10

10
To enter a new Net ID (obtained from the network
administrator):
1. Use the UpArrow and DownArrow to cursor to Net ID.
2. The default Net ID appears in hex format. Backspace over
the existing value, type a new value in the range 102-1FE
(in hex, not case sensitive), and press ENTER.
3. Power the terminal off.
4. Cold boot the terminal again.
Terminal Attempts to Associate with Access Point
The terminal attempts to associate with an Access Point (AP)
using the default Net ID.
If Terminal Association with AP Is Not Successful
If the terminal is unable to associate with the AP (the Net ID
is wrong or forgotten), it displays the message:
STAT24 Ver 1.XX
NOT Associated
for a few seconds. A second message follows:
Terminal cannot associate with AP. You're
out of range or not configured. Ctrl+C to end
or other key to retry. Strike any key when
ready.....
The terminal continues trying to connect until attempt is
cancelled.
Quick Reference