Seachem Impulse 400 Manual Del Proprietário página 11

MAINTENANCE
For the periodic maintenance of the pump, always unplug the pump first.
Then, proceed: take away the intake grill (9), the ring nut (8) and then the threaded pre-chamber (4); take away the impeller
assembly (2) and rinse it under fresh water. Always check the condition of the o-rings.
Any damage to the o-rings, even small, can seriously endanger the pump performance. In this case it is recommended to
replace them.
Rinse each part with water, using a soft brush to remove the deposit. Then assemble everything in the reverse
order.
INSTRUCTIONS FOR THE CORRECT DISCHARGE OF THE PRODUCT ACCORDING TO EU DIRECTIVE
2002/96/EC
When used or broken, this product does not have to be disposed with other waste. It can be delivered to specific electrical
waste collection centers or to dealers who provide this service. Disposal of electrical products separately avoids negative
consequences for the environment and for overall public health and allows the reuse of materials providing savings of energy
and resources.
LIMITED WARRANTY
"Seachem guarantees this product (see Exclusions below) to the original purchaser against defects of materials and
workmanship for a period of three (3) years from the date of original purchase, except for the pump's impeller, which is
guaranteed for a period of six (6) months. This warranty is limited to repair or replacement (at Seachem's option) of defective
product only and does not cover loss of aquarium life, personal injury, property loss, or damage arising from the use of the
product. You must retain original proof of purchase to validate the warranty. Any warranty herein shall run concurrently with,
and not in addition to, any minimum warranty periods established by applicable law.
Claims made under warranty shall be filed online at www.seachem.com by the original purchaser and who must provide proof
of purchase at the time of filing. The claimant must obtain a "Return Merchandise Authorization" at the time of filing before
sending any product for warranty or technical service. The purchaser bears the cost of shipping to and from the service
center or repair station. EXCLUSIONS. This warranty does not cover the following: *Damage resulting from accident, misuse,
abuse, lack of reasonable care, use of the product that is other than normal or ordinary, using the project in abnormal working
conditions or any other failures not resulting from defects in materials or workmanship. *Damage resulting from modification,
tampering with or attempted repair by anyone other than Seachem or its designee. * Transfer of the product to someone other
than the original purchaser. * Subjecting the product to electrical service not specified in the packaging; the original purchaser
is responsible for providing adequate electrical facilities."
EXCLUSION DAMAGES AND LIMITATION OF IMPLIED WARRANTIES
Your sole and exclusive remedy is product repair or replacement as provided in this Limited Warranty. The company disclaims
any liability for incidental and consequential damages for breach of any express or implied warranty or conditions, including
the implied warranties or conditions of merchantability, merchantable quality, fitness for a particular purpose, or of satisfactory
quality with respect to this product. This writing constitutes the entire warranty agreement of the parties with respect to the
subject matter hereof, no waiver or amendment shall be valid unless in writing signed by Seachem. Any implied warranties
herein are limited to one year or the shortest period allowed by the law of your jurisdiction.
FIND OUT HOW TO GET YOUR PRODUCT GUARANTEED FOR 5 YEARS
To improve our service and our customers' satisfaction, Seachem offers the possibility of adding a 2 year extension (5 years
total) to the warranty by simply registering your product on our website www.seachem.com
Fill-in the form and upload the product's purchase receipt. After having correctly inserted all your data, complete the warranty
extension request.
ATTENTION!
Limestone deposits and natural wear on the components may cause the pump to become louder over time. This does not
affect the function of the pump. In this case, we recommend that you replace the ceramic shaft (L).