Electrical Schematic; How To Operate - MS 50604 Manual De Instrucciones

IV. Electrical Schematic
Regulation of resistance to steam setting.
Power Button
V. How To Operate
1. Please check the current input rated voltage and frequency if are
the same with the rating label's data before using. They are should be the
same.
2. Please place the unit in the suitable location at horizontal direction
for all time.
3. Take off the water tank from the base, and let the outlet in the upside,
turn on its cover and fill purified water which under 40℃ into it. If use quali-
ty problem tap water, the unit can't spray possibly.
4. Pull up the cover and clean off the water on the water tank's surface
after fill up, and finally put the water tank back onto the base steadily.
5. Put the nozzle into the slot at the top of the water tank.
6. Switch on the power, and turn on the main switch (that is banned
without water). Then the power indicator light will also be turned on, and
the humidifier begins to spray. The power indicator light will be in below
states:
Power indicator light type
Single light
Table indicator light
Source power button
Normally work
Green
Fan
Sensor
Sensor water level.
Lack-water
Red