Method Of Use - CANGAROO SENSE Instrucciones De Uso

3.Step 3 - See Figure 3: Screw the suction adjuster (C) on the narrow end of the suction adjusting pin (E), which comes out
of the membrane.
4.Step 4 - See Figure 4: Insert the silicone membrane (D) with the fixed pin into the pump body (B). Press the upper end of
the membrane to the pump body. The membrane must fit tightly to the pump body.
5.Step 5 - See Figure 5: Place the Handle (H) on the Suction adjuster(C). Press down gently until you hear a clicking sound
indicating the handle is secured.
6. Step 6 - See Figure 6: Insert the silicone valve (K) into the pump body (B). Make sure that the valve fits perfectly on all
sides of the pump body. Be careful not to scratch it or damage it, as this may lead to no suction vacuum during use.
7.Step 7 - See Figure 7: Attach the bottle (J) to the pump body (B) clockwise.
IV. METHOD OF USE
A. When to use the breast pump:
1.Only if you have sufficient milk secretion and normal time for breastfeeding.
Commonly the use of the manual breast pump may begin two or four weeks after the birth of your baby until you set a
schedule of expressing the breast milk and the breastfeeding. In case your doctor/ health advisor hasn't recommended you
another way of expressing your breast milk.
2. In the following cases you can always use your breast pump:
• If you are expressing breast milk with which the baby to be fed, while being in the hospital.
• If you have more breast milk, you can express some of it between meals in order to reduce the pain of the bulging breasts,
and this way it is easier for the baby to suck.
• If your nipples are painful or are cracking, you can express some milk for feeding until the nipples get better.
•If you need to separate from your baby and hope to continue breastfeeding after reunion, breast milk can be expressed
periodically to maintain milk secretion.
B. Hints:
1. It takes practice in order to use the breast pump the best way possible. So, it will take you at least several attempts before
you manage to use the manual breast pump successfully .
2. Choose a quiet time to use the pump – time, when no one will disturb you. If you are working again, it may need to
express milk in the breaks.
3. You should find the optimal expressions for the day, for instance right before and after the first breastfeeding in the
morning, when your breasts are full or after breastfeeding, when the baby hasn't taken all from both of your breasts.
4. The picture of your child may help to stimulate the expression of the milk.
5. Sit in a comfortable chair, in a perpendicular position to the ground. Рut a comfortable cushion behind your back before
you start using the breast pump. Take a glass of water and place it near you, because you may feel thirsty during the
pumping process.
6. Place a warm cloth on your breasts for a few minutes before starting to express the breast milk as this may make the
process easier and relieve the tension in the breasts.
7. Warmth and relaxation help for the easier expressing the milk, so before using the breast pump, you can take a bath or a
shower.
8. Try to breastfeed the baby on one of the breasts and in the same time to use the better stimulation of the secretion.
Practice in order to find the best expression technic for you.
10. If the process is causing you breast pain, stop immediately and consult with a doctor at once.
11. Breast pump use errors:
The manual breast pump is an appliance, which helps the women after birth to calm the pain in their breasts and to prolong
the breastfeeding time. It uses the premise that there is sufficient milk and smooth mammary gland. For some women, which
are mothers for the first time, the mammary gland usually is not smooth enough. A reason sometimes can be the congenital
nipple inversion or milk water shortage. So, we suggest you before purchasing and using the pump, to consult with a doctor
who could confirm that your mammary gland is smooth and that the breast milk is in normal condition. Do not buy and use
the pump only as a device to unblock your milk ducts.
C. Usage of the manual breast pump:
1.Wash your hands well and make sure that your breasts are clean. Express some milk, in order to check if the milk ducts
are blocked or not.
2.The pump must be sterile and assembled.
3.Take the pump and place the silicone massaging pad on your breast. It should fit tightly to it, and the nipple should be
pointed in the middle of the opening of the pump body.
•See Figure 8 - Make sure that the nipple is in the center in order the silicone massage pad to fit perfectly to your breast, so
as to create a perfect vacuum (do not let air into).
•See Figure 9 – Place the button on the handle to "one drop" position to activate the massage mode.
•Start carefully to press down the handle until you feel a slight suction. After that leave the handle to return to the starting
position. Repeat this step a few times fast, in order to stimulate the expression.
•See Figure 10 - Then, switch to suction mode, rotate the button to the "two-drop" position. pressing the handle down until
you feel a slight suction from the breast. Then allow the handle to return to its original position. Repeat this step a few times
fast in order to stimulate the expression.
9