Work Light - Wagan Tech Quick Flow Manual De Usuario

7. When desired pressure is reached, turn off compressor and
disconnect hose.
8. Unplug the power cord from 12 Volt socket and store the hose and
cord back into the unit.
NEVER LEAVE COMPRESSOR UNATTENDED WHILE IN USE.

WORK LIGHT

The Quick Flow
™
light.
1. Unwind power cord from the storage compartment of the unit and
insert the DC plug into the 12 Volt cigarette lighter socket of your
vehicle.
2. Turn the power switch to "|" position to turn on the work light.
3. When finished, turn off the work light before unplugging the DC
power cord from your vehicle.
TROUBLE SHOOTING
COMPRESSOR DOES NOT START/BLOWS FUSES
1. Push the power plug firmly into the DC socket and twist it back
and forth to ensure clean contact.
2. Check DC socket for dirt and particles. Use a non-conductive
probe to clean the DC socket. Do not use your fingers or metal.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
Compact Air Compressor comes with a built-in work
©2013 Wagan Corporation. All Rights Reserved.
4