Charging Method - InMotion E-SCOOTER L6 Manual De Usuario

3.2. Speed and Mileage Estimation afterCharging
Status Average speed
Cruise 15km/h
NORMAL 25km/h
3.3. ChargingMethod
Step 1: The position of the charging port is at the rear of the INMOTION E-
scooter, as shown in Fig. 1: Open the Charging cover, and make sure that the
Charging interface is dry.
Step 2: Insert the charging port to the charging interface on the INMOTION E-
scooter (then insert the
socket(AC110~220Vcommercialpower,universaluse).
Step 3: When the indicator of the charger is on in red color, it means it is charging;
when the indicator turns to green from red, it means that the battery is fully
charged. Stop charging at this time, as long time of charging will affect the service
life of thebatteries.
Far Remark
35km According to the test statistics on continuous running of this product on flat ground
by a user weighted 70 kg, the actual mileage, after Initial use of this product,
25km
depends greatly on the body weight of the rider and its driving style,
condition, weather and state of batteries. Therefore, the above data are for
reference only. The mileage after each charging may somewhatvary.
plug of the charger into the power
49
road