HEINE F.O. 4 NT Serie Manual De Instrucciones página 10

Changing the batteries
 8 Standard F.O. and F.O. 4 SLIM / Small F.O.
–
Unscrew the bottom insert from the handle shell and then out of the casing and replace the
(charging) battery.
9 
F.O. 4 SHORT
Unscrew the charging unit from the handle shell and replace it.
 
Short F.O.
Unscrew the handle head from the handle shell and replace the battery.
 
F.O. Angled Handle / F.O. S.P.
Unscrew the bottom insert and replace the battery.
Changing the bulb
2 4 6 8  
To replace the XHL lamp, unscrew it and screw in a new lamp to the end stop.

F.O. Angled Handle
Unscrew the handle head (f) from the handle shell (e).
Unscrew the nut (g) using the spanner (k) or a coin.
When using a coin, it must be inserted simultaneously
into the slot of the nut (g) and socket (h) and pushed
down. Completely unscrew the nut (g) and remove the
socket (h) and lamp (i) from the fixture. Insert a new
bulb into the opening (j) and screw the fixture and
nut on again. Place the handle head onto the handle
shell so that the markings
then screw it on tight.

F.O. SP
Unscrew the handle-head and pull out the bulb. Push in
a new bulb and replace the handle-head.
Please note that when replacing the lamp, the spring does
not need to be not be removed. If the spring was removed
unintentionally, attention must be payed to the mounting
orientation during reassembly. Failure to do so, could
cause a malfunction.
Service
The device has no components serviceable by the end-user.
10/56
face each other, and
MED 112782
(g)
l
(j)
(e)
2018-02-07
(k)
(f )
(h)
(i)