Configuration (Setup Menu) - Denver MAXX Serie Manual De Instrucciones

Configuration (Setup Menu)

To configure the scale; i.e., adapt the balance/scale to individual requirements.
Step
1. Switch off the balance/scale
2. Switch on the balance/scale and
while all segments are displayed
Navigation in the Setup Menu
Key Press briefly
(ENTER)
Menu level: Move to the right (cyclical)
(F)
Menu item: Scrolling
(ZERO)
Menu level: Move to the left
Parameter Settings (Overview)
Setup 1 Weighing
menu
5. and 6.
8. Additional
functions
9. Reset menu
16
ο Factory setting
1.1. Adapt filter
1.2. Application filter
1.3. Stability range
1.5. Calib./adjust./linearization:
Function of the (CAL) key
1.6. Auto zero
1.7. 1st weight unit, or 2nd unit
in Toggle Weight Units app.
Only relevant with built-in data interface: see corresponding interface description
8.1. Block key functions
8.2. Automatic shut-off
9.1. Factory settings
Key (or instruction)
(ON/OFF)
(ON/OFF)
(ZERO) briefly
Press and hold
Confirm setting
–
Save settings and exit Setup
√
1.1.1
ο
1.1.2
1.1.3
1.1.4
ο
1.2.1
1.2.2
1.3.1
1.3.2
1.3.3
ο
1.3.4
1.3.5
ο
1.5.1
1.5.2
1.5.3
ο
1.6.1
1.6.2
1.7.1
to 1.7.23
8.1.1
ο
8.1.2
ο
8.2.1
8.2.2
8.2.3
9.1.1
ο
9.1.2
Display
User-defined setting
Very stable conditions
Stable conditions
Unstable conditions
Very unstable conditions
Final readout
Filling
1/4 digit
1/2 digit
1 digit
2 digits
4 digits
Calibration/span adjustment
Linearization: for service
personnel only
Key blocked
On
Off
User-defined unit: see
"Toggling between Weight
Units"
All keys blocked except
for (ON/OFF) and (ZERO)
All keys unblocked
After 2 minutes
After 5 minutes
After 10 minutes
Restore
Do not restore