AGGIO Luisi Air Instrucciones De Uso página 13

Warning!
Before connecting the flexible exhausting pipe
to the motor, make sure the stop valve, which is
on the air outlet of the motor, can swing. (Only 1
motor version)
Sucking version
* Fix the pipe-bearing stirrup (Fig. 8) to the wall
or ceiling by using the proper reinforcements and
screws in equipment. Connect the cooker-hood
flange with the evacuation hole by using a proper
pipe.
Now mount the inferior chimney by inserting it
through the front side of the cooker hood and
then turning it down until it is fixed inside (Fig. 9).
WORKING
(Fig. 11)
A: Light switch on/off
B: Motor switch on/off (1
C: 2 rate level switch
nd
D: 3 rate level switch
rd
E: 4 rate level switch
th
F: 10-minute timer.
TIMING
As a result of the new EU65 "Energy label" and
EU66 " Ecodesign" regulations issued by the Eu-
ropean Commission, which came into force as
from January 1 , 2015 , our products have been
st
adapted to comply with these new requirements.
All of the models complying with the energy label
requirements, are equipped with new electronics
including a timer device for suction speeds con-
trol, when the air capacity exceeds 650m³/h.
Internal motor models, with maximum air capa-
city higher than 650m³/h, are equipped with a
timer device that automatically switches the suc-
tion speed from 4
operation.
Operation speeds can also be changed during
operation.
The energy consumption of the appliance in
stand – by mode is lower than 0.5W.
13
rate level)
st
to 3 speed, after 5 minutes
th rd