Duux Whisper Flex Manual De Instrucciones página 10

3.2 Instructions for using the LED display
Remove the parts from the packaging
1
and assemble the device according to the
instructions in this manual.
Connect the power cable to the input terminal
2
in the base of the product. Then insert the
plug into the wall socket. The LED display will
light up and show '00'.
Press the control ring once, to turn the
3
product on. The fan springs into life and will
thereafter default to the most recent speed
setting.
Use the stainless steel exterior of the
4
aluminium control ring to switch between
settings.
10
Power
Timer Up
Ventilation speed down
Timer down
Horizontal oscillation
When a display icon is flashing, you can
5
set and adjust this setting by pressing the
control ring. When the desired position is
reached, press the control ring again to
confirm the selection.
When setting the fan speed and timer
6
function, the LED display will continue to flash
until the desired setting is selected. After this,
press the control ring again to confirm the
selection.
Once the function is set, the icon will stop
7
blinking and will remain visible in the display,
for as long as this function is set to on.
Press and hold the control ring to switch off
8
the device.
Night mode
Natural wind
Ventilation speed up
Vertical oscillation