System Settings; To Enter The Settings Mode; Settings; Exiting Settings Mode - Stryker iSwitch Manual De Operación Y Mantenimiento

System Settings

Using the 2 mode buttons on the Receiver, the system Settings may be modified as
listed below:

To enter the Settings mode

Press and hold both mode buttons on the Receiver for 5 seconds
• In this mode, the left (Footswitch 1) mode button toggles among
options.
• In this mode, the right (Footswitch 2) button enables or disables the

settings.

Settings
Speed Mode (Default: Disabled)
• When enabled, a single press of button II on the Footswitches changes
the mode.
• When disabled, press and hold to select the device.
Note If using 2 handpieces in Speed Mode, press and hold the Mode
button to change handpieces.
Teacher Mode (Default: Disabled)
• When enabled, 2 Footswitches may select the same device. Pressing
button II on either Footswitch will give it primary control. To transfer
control, simply press button II on the second Footswitch.
• When disabled, the Footswitch will function as normal. Only one
Footswitch will control the selected device.
Global Merge (Default: Disabled)
• When enabled, two Footswitches may select the same device. The
Footswitch pressed first will receive primary control. Control may
then alternate between Footswitches when the pedals on the primary
Footswitch are not pressed and the pedals on the second Footswitch
are depressed.
• When disabled, the Footswitch will function as normal. Only one
Footswitch will control the selected device.

Exiting Settings Mode

To exit the Settings Mode, press and hold both Mode buttons for 5 seconds. The
selected settings will remain unchanged.
10