Inserting Memory Card - aqprox appEB02G Guía De Usuario

Inserting Memory Card

The Reader supports TF card in both FAT and NTFS file system. NTFS is
needed to copy file with size larger than 4GB.
To insert a Memory card:
 Check that the TF card is in the correct position with the contact
pin facing upwards as illustrated below. You may damage the card
and the reader if TF card is not inserted in correct position.
 Push the TF card into the card slot until it clicks.
 To remove TF card, push the TF card once again until it clicks.
 When a TF card is inserted in or ejected from the reader, it may
take few seconds for the reader to update the content.
 Please avoid inserting or ejecting TF card when other operation is
running as this may cause the system hang.
 Do not remove the card if the content inside the card is being
played. This will halt the operation of the reader and cause the
reader to restart.
 If the system is not responding, press and hold the <Power>
button for 6 seconds to reset and turn it off.
Limitations with NTFS file system:
 Books in the card are not recognized by ADE when connected to
PC.
 Direct copy of files from internal memory to card is not supported.
Getting Started
4
5