Instruction Manual; Features; Pairing; Charging - Retro-Bit SEGA SATURN Manual De Instrucciones

E N I N ST R U C T I O N M A N UA L

FEATURES

• 2.4 GHz officially-licensed wireless controller
• Compatible with SEGA Saturn®, SEGA® Mega Drive Mini, PC/Mac®, PS3®, and Switch
• Includes both SEGA Saturn® port and USB® port receivers
• Rechargeable 500mAh Li-Ion battery
• Includes 3.3 ft charging cable
• Up to 30 ft gaming range
• Sleep mode after 5 minutes of inactivity
• Includes instruction manual & exclusive SEGA® case for controller, receivers and cable
storage.

PAIRING

• Connect the appropriate receiver into the console's controller port.
• Once connected, the LED on the receiver will blink to indicate it is in search mode.
• Press Start on the controller. The LED on the controller will blink as well.
• Press and hold the Sync button on the receiver.
• Release the Sync button once both the receiver and controller's LED remain solid.
If you encounter an issue while pairing, you can reset the controller in one of two ways:
Press and Hold Start + R for 4 seconds
•
• Inserting a thin metal wire (an unbent paperclip for example) into the small hole on the
back of the controller. Gently press and hold until the LED stops glowing. Then restart the
pairing process.

CHARGING

When the controller's battery is low, plug in the Micro USB® charge cable into the controller and the
USB® end into a powered slot on the console. Once fully charged, the LED will stay on.
SEGA® MEGA DRIVE
• The controller's LED will be red to indicate it is in 6-Button Mode and blue if it is in 3-Button
mode. To switch between the two modes, press and hold Start + B until it changes color.
SEGA® MEGA DRIVE MINI
If the LED on the controller is blue, press and hold Start + B until it changes to red. The
•
controller will not function on the console if it is blue.
4