Dual Alarms Operation; Setting The Sleep Timer (Remote Control Only) - Brandt BDS-795L Manual De Instrucciones

DUAL ALARMS OPERATION

Before setting the alarm time, make sure the Clock has been set.
Setting the alarm 1 or 2
1 Press and hold ALARM 1 / ALARM 2 on the remote control or unit until "AL1" / "AL2"
flash on the display.
2 Press and hold or repeatedly press
select an alarm sound source: iPod/iPhone/iPad, FM tuner or buzzer.
3 Press ALARM 1 / ALARM 2 on the remote control or unit to confirm.
• The hour digits will flash on the display.
4 While the hour digits are flashing, press & hold or repeatedly press
control or
H
5 Press ALARM 1 / ALARM 2 on the remote control or unit to confirm.
• The minute digits will flash on the display.
6 Repeat steps 4 to 5 to set the minutes.
7 Repeat steps 4 to 5 to select the ring to alarm the whole week, on weekdays, or on
weekends.
8 Repeat steps 4 to 5 to set the alarm volume.
9 Once the alarm is set, the display will show "AL1
Activating and deactivating the alarm
Repeatedly press ALARM 1 / ALARM 2 on the remote control or unit to activate / deactivate
the alarm.
• If the alarm is activated, the display will show "AL1
• If the alarm is deactivated, "
Snooze function
This function can be used to stop the alarm temporarily for about 9 minutes once the alarm
is activated. When SNOOZE/DIMMER on the remote control or unit is pressed, the alarm
sounds will stop and sound again after about 9 minutes.
Stop the alarm
When the alarm sounds, press ALARM 1 / ALARM 2 on the remote control or unit. The
alarm will stop but the alarm settings will remain.
Check alarm time
Press ALARM 1 / ALARM 2 on the remote control or unit.

SETTING THE SLEEP TIMER (REMOTE CONTROL ONLY)

This unit can enter the standby state automatically after a set period of time.
To set the sleep timer, repeatedly press SLEEP to select a set period of time from 90, 60, 30
or 15 minutes.
- When the sleep timer is activated, the display will show «
gradually decrease before the unit enter the standby state.
- To check remaining sleep time, press SLEEP.
- To deactivate the sleep timer, repeatedly press SLEEP until "OFF" is shown on the
z
display. «
z
DS406_Kesa_BDS-795L_IFU(EN-FR-NL-ES-CZ-SK).indd 9
/ on the unit to set the hour.
G
" will disappear on the display.
z
» will disappear on the display.
/ on the remote control or
 
/AL2 ".
/AL2 ".
/ on the unit to
H G
/ on the remote
 
z
z
». The volume will
z
2014-2-17 15:40:21
EN
9