DJ-Tech D JM-303 Manual De Instrucciones página 5

PART NAME AND FUNCTIONS
10. Fader Start ON/OFF - When the unit has been connected with a control cable to a
CD player, this is the ON/OFF switch for the function to automatically start playing and
stop (back cue) of the CD player using the crossfader.
11. C.F.Curve Switch - Used to select the rising curve patterns for the crossfader
function.
When switch to left (THRU) position, the crossfader is disabled. On/off
a THRU
switch for fader start function using the channel fader.
When switch to center (
b
selected.
When switch to right (
c
selected.
12. FX ON Button - This button functions as an effect Master on/off button and is used to
activate and deactivate the effects.
13. Level Depth - Used to adjust the value of the parameter Y (mix ratio or resonance or
feedback) of the effector.
14. Effect Select Knob - Used to select desired effects.
15. CH Select Knob - Used to select the source to be effected.
16. Effect Beat Selector Knob - To select different beat (also change the time parameter)
according to the measured BPM of the effector.
17. Beat/Pitch +,- Buttons
• beat up (+) - Doubles the calculated BPM.
• beat down (-) - Halves the calculated BPM.
• In sampler mode, hold the ERASE button and press BEAT/BANK button, the
music sample recorded in the bank will be erased.
• In sampler mode, press + button, pitch increases ; press - button, pitch
decreases.
18. Tap Button - This button is used to manually calculate BPM. In the Auto mode, press
the Tap button to switch to manual BPM. Hold the Tap button and press Beat/Pitch
button (-,+) to manually increase or decrease BPM.
19. Auto Indcator - Switch Auto/manual BPM by pressing Auto button.
20. BPM Display - Display the current track tempo as beats per minute. In the Auto
mode, the display flashes when BPM can't be calculated.
21. Channel EQ - Contour the frequency response for each channel 9 +/-2dB.
) position, a slowly rising curve response is
) position, a rapidly rising curve response is
5