Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INVERSION OF DIRECTION OF OPENING AND BALANCING
Version BR-V, BR4-24 and BR4-24K
•
Turn off the power supply and, with the manual manoeuvre, place the rod vertical, restore
the transmission and remove the rod to prevent hazardous conditions.
•
Open the door, loosen the tension system of the spring and then release it from the upper
fastening.
•
Remove the fastening screw so as to free the spring in the upper part and allow it to be posi-
tioned on the opposite side of the fastening lever.
Version BR-624 and BR-624K
•
Turn off the power supply and, with the manual manoeuvre, place the rod vertical, restore
the transmission and remove the rod to prevent hazardous conditions.
•
Open the door, loosen the tension system of the springs and then release the springs from
the upper fastening.
•
Remove the fastening screws so as to free the springs in the upper part and allow them to
be positioned on the opposite side of the fastening lever.
•
Unscrew the lever so as to allow it to rotate and allow fastening of the springs in the oppo-
site position.
•
Fasten all in the indicated positions and tension the springs (see the paragraph on balanc-
ing).
BALANCING
•
Cut the power supply.
•
Release the rod.
•
Position the rod at about 45°.
•
Loosen the locking nut(s) of the spring tensioner(s).
•
If the rod tends to fall, adjust the spring tensioner(s) so that it is stopped.
•
When balancing is complete, fasten the locking nut(s) again.
•
Restore motorized operation by turning the release key in the opposite direction.
•
Restore the power supply and check that everything works correctly.
This product is composed of various components which may in turn contain pollutants.
Do not dispose of it in the environment! Find out about the method for recycling or dis-
posing of the product in compliance with current local laws
DISPOSAL
13
Tabla de contenido
