Idiomas disponibles
Idiomas disponibles
CONFIGURATION
QNUBU
-Temperature setting:
Press the SET button
buttons
-Time settings:
Press the SET button
buttons
-Confirm settings: After finishing setting the time and temperature you
must press SET
The plates will start to heat up
-Countdown: After closing the plates, press the countdown start
button.
PRESSURE RELIEF VALVES:
valve clockwise (clockwise only one or two turns, not pushing too far to the right), and when
you fill it, then start shaking the handle and push the board up. After pressure is complete, the
nut is loosened slightly to the left to separate the plate and remove the material.
TEMPERATURE & TIME SETTING:
Set button
1 time, the display shows "SP", then use the
to increase or decrease.
1 time, the display shows "ST", then use the
to increase or decrease the pressing time.
again to confirm settings.
When you loosen the nut on the left, don't turn it many
times, no, just turn it one or two times.
Increase
Decrease
button
Before tightening the grip, tighten the regulating
DO NOT FORCE THE PRESS!
IF YOU TRY TO APPLY MORE PRES-
SURE MAY DAMAGE THE PRODUCT.
Countdown
button
button
TIP
