Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USA
Operation
Adding water
WARNING!
Risk of short circuit!
Water that has penetrated the housing may cause a
short circuit and an electric shock. You could injury
yourself if you come into contact with the steam iron.
− Pull the power plug out of the socket before you
fill the water tank with water.
Notice:
Do not use any distilled or demineralized water or chemical additives.
This will suppress the anti-limescale function.
1. Hold the steam iron at a slight angle and pull the water tank lid
(see Fig. B).
2. Use the enclosed measuring cup
water. At the same time, make sure that you do not fill the water tank any
further than the MAX mark (see Fig. C).
3. Close the water tank lid
4. Wipe off any water that has spilled.
Operation
WARNING!
Burn hazard!
The textiles become very hot when ironed!
− To avoid any risk of burns, do not touch them
directly after ironing.
Setting the temperature
You can refer to the table below for the temperature setting for the different
fabric types. Always take note of the information on the care label of your piece
of laundry.
AFTER SALES SUPPORT
1 855 754 8297
USA
15
to fill the water tank
1
again. It must noticeably lock into place.
Steam Iron
1
up
10
with tap
www.aldi.com
MODEL: 92154
02/2015
15
Tabla de contenido
