NEO PROTON 12 HEX USB Manual De Usuario página 11

6. INFRARED (IR6) REMOTE CONTROL OPERATION
The IR6 infrared controller enables remote control of the
QUAD-PAR 12. To pair the IR6 to the Q PROTON 12 HEX
USB , follow these steps:
1. Press MENU button until SEr is displayed
2. Press ENTER
3. Press UP or DOWN to turn infrared operation
ON or OFF
4. Press ENTER
Ir6 button functions
•
AUTO: Run auto programs
•
FADE : Fade auto programs
•
SPEED: Enable speed adjustment of auto programs
•
+/ -: Increase / decrease speed of auto programs
•
SOUND : Activate sound-active mode
•
SENSITIVITY: Enable sound sensitivity adjustment
•
+/ -: Increase / decrease sound sensitivity
•
MANUAL : Enable static color selection
•
0-9: Select static colors
•
R: Select red
•
G: Select green
•
B: Select blue
•
A : Select ambar
•
+/ -: Increase / decrease output of each color
•
% : Enable adjustment of total light output level
•
+/ -: Increase / decrease total light output
•
STROBE: Enable adjustment of strobe rate
•
+/ - : Increase / decrease strobe rate
•
STROBE: Press again to turn o strobe
•
BLACKOUT: Turn o all light output
•
BLACKOUT: Press again to exit blackout mode
P. 11
PROTON 12 HEX USB
ENGLISH VERSION