Mx Onda MX-BBM2151 Manual De Instrucciones página 44

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Do not get in the glass jug too hot and prevent damage to it because of a
"thermal shock". We recommend you preheat the glass jug, place the glass
jug under the faucet with hot or warm water.
Never use the mixer in continuous operation for more than 2 minutes.
If for some reason when using the blender you need to open the lid of it,
remove the jar from the base or disconnect it from the mains.
In case of failure, abnormalities, the blender itself is dropped, the plug or
other parts are considered impaired, or the cable is damaged, do not use
the appliance and do not attempt to repair it yourself. Contact our
Customer Service nearest MX ONDA.
BEFORE USING THE MIXER FOR THE FIRST TIME
• Carefully read all sections of this manual.
• Remove the jug and remove the cover and the measuring cup.
• Remove the blades of the mixer (as described in the INSERT AND
REMOVE THE STEEL BLADES section).
• Wash with soap and warm water jug, the lid, the measuring cup and the
blades (extreme caution when washing this piece).
• Then carefully dry all parts and reassemble in the blender.
• It is possible that the first few times you use the blender, a slight odor
occurs. This is normal and is because the device is new, it will disappear
shortly after use.
• The gear selector only illuminate when the jar is properly engaged and the
engine is running.
SAFETY SYSTEM AND PLACEMENT OF GLASS JUG
The blender includes a safety system that prevents operation of the same while
the glass jug is not attached properly on the base.
Inserting the glass jug
The base or set motor 7 has two grooves and two small slits in the top and the
glass jug 3 has two tabs and two small tabs at the base of it. Place the jar on
top of the base or motor assembly matching big eyelashes pitcher with big
cracks in the base or motor assembly. Then make a small turn in the direction
of clockwise, until you feel small "click" indicating that the jar is properly
docked.
Removing the glass jug
To remove the glass jug make a little twist counterclockwise, then pull up the
glass jug.
4
Tabla de contenido
loading

Tabla de contenido