Cleaning - OLLAS GM FULL CRYSTAL Manual De Instrucciones

Mode selector :
Touch the button to select the desired mode, among the 5 available modes:
1) Manual mode: select the desired power level (from 0 to 10) with the
2) Keep warm
3) Soup
4) Rice
5) Coffee
Cooking time schedule
Once the desired mode has been selected, touch the
induction hob to start heating the pot/pan. The display will show 00:00 and start blinking.
• Use to increase the minutes (max. 59').
• Use to increase the hours (max. 23h).
• Once the desired number of hours and minutes has been selected, the display will stop blinking
automatically. The appliance will immediately start a countdown, until the time reaches 00:00. The
induction hob will then start heating the pot/pan.
Timer (only available on manual and keep warm modes):
Once the desired mode has been selected, touch the
want the induction hob to heat the pan/pot. The display will show 00:00 and start blinking.
• Use to increase the time minute by minute and
• Once the desired time has been selected, the display will stop blinking automatically and the
induction hob will start heating the pot/pan immediately for as much time as selected, unless
turned off manually.

CLEANING

In order to clean the product, you must disconnect the power cord, wait until the glass plate has
cooled, then follow the instructions below:
• Glass surface: if the glass plate is very dirty, clean it using a damp, non-abrasive sponge or, for
stubborn stains, use an appropriate cleaning product, designed for use on glass hobs.
• Cooking surface and control panel: use a damp, soft cloth to clean it. In case of any oil stains that
are not easily removed, wipe away the stains with a soft cloth rinsed in warm water and a little
detergent and then, clean it using a damp soft cloth.
• Air entry/air exit: remove any dust with a cotton bud.
(not available in the manual mode):
(increase) and
button to select when you want the
button to select how much time you
to decrease it (max. 3h).
ENGLISH
(decrease) buttons.
17