Switching The Burner On And Off; Turning Off - Angelo Po 0N0FT1G Manual De Uso

Lighting
Important
The fi rst time the griddle is switched on, wash
the plate to remove the protective grease and
any dirt, then switch on the appliance and
preheat it for about 2 hours at the tempera-
ture of 180°C.
Turn on the appliance's circuit breaker to con-
1)
nect it to the electrical mains.
Turn on the gas supply tap.
2)
Press the knob 3)
(pos. ) while keeping button (B) pressed, to
1
light the pilot light.
Keep the knob pressed for about 15 sec. to pri-
4)
me the thermocouple.
Press and turn the knob (A) anti-clockwise
5)
(pos. ) to the maximum temperature and leave
2
it there for about 2 minutes, then turn the knob
to the temperature required.
Important
For appliances with chromium-plated and
compound plate, preheating of about 30 min
to the temperature of180°C. is necessary the
fi rst time the appliance is switched on each
day.
GB
Iron plates
Chromium-
plated plates
Compound
plates
3269771_ut_GB

SWITCHING THE BURNER ON AND OFF

iand turn it anti-clockwise (A)
Minimum Maximum
temperature temperature
(°C) (°C)
B
A
3
Turning off
Turn the knob clockwise (pos. 1) to turn the bur-
1)
ner off . The pilot light will remain on to allow the
burner to be re-lit.
Turn the knob clockwise (pos. 3) to turn off the
2)
pilot light.
Turn off the knob to ensure safety.
3)
- 10 -
A
1
2
ENGLISH