Location Of Controls - Lenco SCD-68 DAB+ Manual Del Usuario

2. LOCATION OF CONTROLS

1) USB socket
2) Aux in socket
3) 3.5mm headphone jack
4) Cassette button
5) Handle
6) FM antenna
7) CD door open/close
8) LCD display
9) Function button
10) Stop /Enter button
11) Skip/Tuning down
12) Menu/Mem/clock-adjust button
13) Timer button
14) Volume up/down button
15) Cassette door
16) Standby LED
17) On/Off button
18) Play/pause /Scan button
19) Skip/tuning up
20) Pre/Folder up
21) Info/Play mode button
22) AC socket
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Important:
Since movement of the cd mechanism and the sensitive circuitry may cause interference to the radio tuner
nearby, switch this unit off while operating other radio devices.
Due to the complexity of MCU control, please unplug the main power supply of the unit if the unit stops
working during operation! This is not a malfunctioning of the system!
3. Connection
1. Connect the end of the detachable power cord to the AC socket (22) and the other end to the AC outlet.
2. When you first plug the unit into the mains, the unit will go into standby mode. The Standby LED will
light up.
3. Turn on the unit by pressing the "On/Standby" button (17). If the LCD display (8) is on with backlighting,
it means the power supply is normal. Now the system is ready to play the music.
4. DC connection
For DC operation, please insert 8 pcs size C (UM-2)
batteries into the battery compartment and remove
the AC plug from the AC outlet; then disconnect the
AC cord from the AC socket. Since the unit will draw
little power consumption during standby mode, it is
suggested to uninstall the battery during standby
mode.
button
button
button
6