Sundirect PE-Plus Manual De Instrucciones página 8

5.6 Mounting installation for IC-Plus/GD-Plus/MD-Plus series
The kit supplied in the package is designed for the mounting on a solid wall/ceiling. If mounted
onto other types of wall/ceiling, you will need appropriate fixings (not supplied). Please make sure
the wall/ceiling is safe to mount. We highly recommend to have the panel installed by a qualified
electrician or installer authorised by Sundirect.
Please note that GD-Plus/MD-Plus series are designed only for wall mounting, don't mount them
on the ceiling.
1
3
5
2
WALL
CEILING
4
WALL
CEILING
6
WALL
CEILING
WALL
CEILING
WALL
CEILING
WALL
CEILING
8
Step 1. Use the supplied
mounting bracket to mark
the position of the holes
on the wall/ceiling. For
vertical wall mounting "A"
signal will be the top of
the mounting bracket. For
horizontal wall mounting
"B" signal will be the top
of the mounting bracket.
Step 2. Drill holes using a
8mm drill.
Step 3. Insert the dowels
into the holes.
Step 4. Screw the screws
into the dowels through
the holes on the mounting
bracket.
Step 5. Mount the panel
on the mounting bracket.
Step 6. Move the panel
into two directions to
make sure the panel is
secured.