Safety Rules - EDM KOMA tools Manual De Instrucciones

COMPONENTS AND USE
PART LIST
1. Keyless chuck
2. Ventilation slots
3. Rotational direction switch
4. On/off switch
5. Torque control
6. Battery pack
7. Battery release button
8. Charger
9. LED-lamp
10. Food indicator green
11. The charge indicator is red
12. Additional battery
13. Bits

SAFETY RULES

Recharge only with
manufacturer. A charger that is suitable for one type of
battery pack may create risk of fie when used with another
battery pack.
Use power tools only with specifically designated battery
packs. The use of any other battery packs may create risk of
injury and fie.
When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects that can make a connection from
one terminal to another. Shorting the battery terminals
together may cause burns or fie.
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or
burns.
Using an attachment and charger not recommended may
result in a risk of fie, electroshock, or injury to people.
Before screwing into a wall, in case of doubt check with a
EN INSTRUCTION MANUAL
CORDLESS DRILL 14.4V
the charger specified
CARACTERÍSTICAS
Battery pack voltage:
No-load speed :
Torque range:
Charging time:
Rotation:
Chuck:
Drilling capacity in steel:
Drilling capacity in wood:
Sound pressure level:
Sound power level:
Tolerance K:
Weight:
by the
metal/voltage detector that you are not breaking into
electricity, gas or water supply lines.
Before lay down the Screwdriver, make sure that all moving
parts have stopped.
Avoid frequent stalling when screwing or drilling, as this
could damage the batteries.
Only connect the charging device to an AC supply.
Charge Screwdriver battery only with the appropriate
charging device.
The charging device and the Screwdriver must be protected
from moisture!
Do not use the charging device outdoors.
Do not charge non-rechargeable batteries.
Do not store or use the tool and battery cell in locations
where the temperature may reach or exceed 40°C (such as
outside sheds or metal building in summer).
Always charge the battery cell between temperatures 0°C to
30°C. Ideal charging temperature is 15°C to 25°C.
REF. 08703
14.4V
0-700 rpm
18Nm
1 h
right / left
keyless chuck
10mm
25mm
83,3 dB (A)
94,4 dB
3 m/s2
1,91 kg