Songmics OBN83 Manual De Instrucciones página 5

Hinweise(DE) / Nota(FR) / Notes(EN) / Note(IT) / Notas(ES)
Ne pas modifier ou rénover la chaise pour éviter le risque des blessures.
Ÿ
Ne pas laisser les enfants jouer dans la zone de travail lors du montage et des ajustages. Les accessoires (
Ÿ
vis, ou les autres petites pièces) peuvent être avalés ou inhalés létale.
Pour éviter le danger inconnu (e.g l'étouffement), gardez toutes pièces et l'emballage (films, sac plastiques,
Ÿ
polystyrènes etc.) loin d'enfant.
Guide of Manual
Please read the assembly and safety instructions thoroughly, and use the product in accordance with the
Ÿ
intended purpose. It is recommended to save the manual for future reference. When offer the product to the
third party, please transfer the manual simultaneously.
The texts and diagrams are illustrated as detailed as possible. For clarity, not all the details of every possible
Ÿ
variation and installation methods can be described. The texts and diagrams are given only as examples. If
you require further information or face some problem, please contact and consult the seller.
It is strictly prohibited to copy, sell, modify or translate this manual entirely or partially for any purpose without
Ÿ
the express written permission of Songmics International GmbH. Songmics International GmbH reserves all
rights.
Notes
Please check if the components are intact before the assembly and strictly adhere to the instruction. Incorrect
Ÿ
assembly or damaged component will have risk of injury.
Never use the product if any component is missing or defective.
Ÿ
When assemble the armest, correctly postion the screws into the holes and then gradually tighten them.
Ÿ
Lift the lever under the seat to raise the seat; lift the lever and sit on the chair to lower the seat. Pull the lever
Ÿ
outward to release the tilt mechanism; push the lever in to lock the mechanism
In resting mode, the seat and backrest will move together when you lean back and the inclination of backrest
Ÿ
can not be changed separately.
The round knob under the seat is to adjust the tilt tension of the backrest and adapt to your body and personal
Ÿ
preferences. Make sure you have enough tension so you don't fall backward when leaning back.
The product is intended for indoor use only and designed for no more than one person.
Ÿ
The maximum static load capacity is 150 kg, the armrests can support up to 68 kg.
Ÿ
To help hold the torso up, do not put the body weight at a single armrest, otherwise it will result in off-balance
Ÿ
or damaging the armrests.
Note:Please place this office chair on horizontally level ground, and keep all five feet in contact with the
Ÿ
ground at all times to prevent falls during use. Please do not perch on the front of the seat to avoid dumping
and sit at the end of the chair completely. When standing up from the sitting position, please clench the arms
of the chair. Dangerous actions such as playing or stooping down are not allowed to do while sitting on the
chair. Otherwise, you may lose your balance.
The wheels of this office chair are suitable for nearly all kinds of floors(ceramic tile floor, wooden floor, PVC
Ÿ
floor, floor rug etc.). Please note that there is a spare wheelas part of the shipping package. Please keep safe.
Not permit to disassemble or heat the gas cylinder. Only professional technician can perform to remove and
Ÿ
replace the gas cylinder and fitting pieces.
EN
5
loading