Beper 40.102 Manual De Instrucciones página 17

EN
INSTRUCTIONS FOR USE
1. To achieve accurate readings, make sure a new, cle-
an sensor cover is in place before each measurement.
Place a new sensor cover on the sensor firmly, making
sure the sensor and the inner portion of the sensor co-
ver fit snugly. To ensure proper hygiene and to avoid
contamination, a new sensor cover should be applied
for each user.
2. Press the ON/OFF switch. The LCD screen will ap-
pear as shown in Figure 2. Wait for the acoustic signal
and the screen to change to setting shown in Figure 3.
The thermometer is now ready for a new measurement.
Note: The symbol
indicates that this thermometer
must be only be used with original sensor covers, other-
wise the accuracy of readings will degrade significantly.
3. Place the sensor snugly into the ear canal. Make sure
the sensor tip faces the eardrum as shown in Figure 4.
Press the TEST Button. The thermometer will emit a
long beeping sound for approximately 1 second. When
the beeping sound is over, the result of the measure-
ment will be displayed on the screen.
4. The thermometer is ready for testing again once the
ear symbol displays on the screen. A waiting period of
20 seconds between testing is recommended to ensure
complete accuracy.
5. The thermometer will shut off automatically after 60
seconds of inactivity. To prolong battery life, press the
ON/OFF switch to turn the device off.
TEMPERATURE MEASUREMENT HINTS
1. The temperature reading may differ from ear to ear, it
is therefore advisable to always measure the tempera-
ture in the same ear.
2. Make sure that the ear is always free from obstruc-
tions or excessive earwax.
3. External factors may influence ear temperatures such
as:
Laying your head on one ear or the other
Covering the ears for a long time
Having been exposed to very high or very low tempe-
ratures
Having been recently swimming or bathing
In these cases, remove the individual from the situation
and wait 20 minutes before measuring the temperature.
17