Insert Batteries - Amplicomms TCL 250 Instrucciones De Uso

Insert batteries

To operate, your alarm clock requires 3 x AA alkaline batteries
(not included).
1. Lay the device face down on a soft, flat surface.
2. Slide down the battery cover on the bottom of the
device and remove it.
3. Insert 3 x AA alkaline batteries by observing the correct
polarity marks "+" and "-" in the battery compartment.
4. Replace the battery cover.
Notes:
• Frequent use of the vibration alarm, strobe light / flashlight,
and loud alarm will significantly affect battery life.
• The empty battery icon appears between the time digits
when the battery is low.
• Dispose of used batteries according to the instructions.
14
(See chapter "Helpline" for costs and hours of operation)
Helpline UK 0844 800 6503