Care And Cleaning; Technical Data - Hansa LED Comfort Instrucciones De Uso

OPERATING INSTRUCTIONS
LED Light LED Comfort
3. To swivel the light to the desired posi-
tion, loosen the tommy screw on the swiv-
el arm, position the light, and then tighten
the tommy screw.
4. To swivel the shade to the desired po-
sition, loosen the tommy screw on the
shade joint, position the light shade, and
tighten the tommy screw.
Turning the light on/off
1. Insert the plug in a socket.
2. Arrange the light in the desired position.
3. Set the On/Off switch to I.
4. Set the On/Off switch to O to turn off the
light.
91378 LED Comfort_20091022.indb 7 91378 LED Comfort_20091022.indb 7
GB

Care and cleaning

Hazardous grid voltage! Risk
of electric shock!
Improper use could result in
electric shock.
– When cleaning the light, always pull the
mains plug out of the socket. When doing
so, always take hold of the plug and not
the cord.
– Make sure that no water penetrates the
inside of the light or other parts carrying a
current.
• Carefully wipe off the light with a damp
cloth or a dry dust cloth.

Technical data

Voltage:
Bulb:
Protection class:
Model number:
Instruction no.:
Distributor
The "distributor" of the device identifi ed on
the title page and the party responsible in
the sense of the GPSG [German Law on
Appliance and Product Safety] and compli-
ance with guidelines for using the CE mark
is:
Styro GmbH
Industriestraße 2
D-91583 Schillingsfürst
Tel.: 0049 (0) 9869 989490
www.styro.de
230 V ~/50 Hz
9 LEDs each 1 W
II
5010 513-514
91378
7
22.10.2009 10:08:05 Uhr 22.10.2009 10:08:05 Uhr