Parts List; Maintenance And Care - KIKKA BOO MAPLE Instrucciones De Uso

WARNINGS
• This product is suitable for children aged from 6 to 36 months except for who are over 3 years old or weighed more than 20kg.
• Please read this manual carefully before using it and keep it for future reference.
• Failure to follow these instructions may affect the safety of children.
• Do not leave your child unattended.
• This product is suitable for children aged 6-36 months.
• If the chair is damaged, torn or missing anywhere, please do not use it.
• Ensure that all users are familiar with the operating methods of the product and that the product can be easily opened and closed. If not, please read the instructions
carefully and use the correct method.
• Before using the dining chair, please carefully check that all parts are installed and adjusted correctly to ensure that all locking devices are in lock state.
• When riding, children must use seat belts to prevent the baby from falling off or slipping out of the dining chair, causing serious injury. Please do not use this product
when your baby cannot sit up on his own.
• When your baby is in the dining chair, do not remove any part of the chair or any part of the mediation chair.
• Don't let your baby climb, play or hang in a dining chair alone.
• This product can only be used on flat and stable ground, and do not place heavy items on the plate to prevent chair from turning over. Avoid placing dining chairs near
heat sources, such as electric heaters, gas heaters, or any place where the baby can be exposed to dangerous goods.
• Be sure to remove all plastic bags and packaging materials before use to prevent the risk of asphyxiation.
• When used by a child, animals should not be placed under the product to avoid danger.
I. PARTS LIST
1. Backrest adjustment button; 2. Seat belt xing hole position; 3. Sleeve xing hook; 4. Seat height adjustment button; 5. Frame closing button; 6. Table plate; 7. Foot
angle adjustment button; 8. Foot tube; 9. Pedal;
II. HOW TO USE THE TABLE PLATE
1.The adjusting handle at the bottom of the candle plate outside, while the mounting tube on the tray is inserted at the hole in the armrest, inserted into the bottom,
released, pulled back to con rm that the plate is in place.
2. Pull out the adjusting handle at the bottom of the plate, slightly pull the plate outward, release the handle, and continue to pull. When a click is heard, it is proved that
the plate is stuck in the second gear. Conversely, the reverse adjustment can bring the plate back to the rst gear. The plate can be adjusted in two gears.
III. HOW TO ADJUST THE HEIGHT OF THE CHAIR
1. Hold down the seat height adjustment button to reduce the seat height.
2. The seat can be raised by direct reverse pulling the seat, and the height of the seat can be adjusted in the in nite gear.
IV. HOW TO ADJUST THE PEDAL
1. Press nad hold down the pedal adjustment button, the foot angle can be adjusted in three gears.
2. To adjust the pedal upward, the pedal can be pushed up directly, but the downward adjustment must be done by using the key button.
V. HOW TO ADJUST THE BACKREST
1. Hold the backrest to adjust the handle, then apply force to the front and back. The backrest can be adjusted according to the need, it has ve gears.
Warning: It is only used for babies over 6 months and weight less than 20kgs. When the backrest is perpendicular, force is applied in the forward direction to adjust the
backrest as needed.
VI. HOW TO OPEN OR FOLD THE CHAIR
1. Press the seat height adjustment button on both sides of the seat armrest and push the seat down to the lowest positon.
2. Press and hold the small button on the bottom bar of the high chair (as shown in gure A), then press and hold the big one (as shown in gure B) together to fold the
chair.
VII. MAINTENANCE AND CARE
• The plastic and metal parts must be cleaned with a damp soft cloth and dried with dry soft cloth.
• Do not let the product exposed to the harmful e ect of external factors - direct sunlight, rain, snow or wind. This may lead to damage of the metal and plastic parts and
fading of the fabrics of the crib.
• When you are not using the product, store it at a dry and well ventilated place, not in dusty, humid premises with very high or very low room temperatures.
From time to time check all plastic parts that are hanged on the frame. Tighten all screw and bolts if necessary.
• Cleaning the cushion: Unfasten the safety belt. Wash it with warm water and dry it to avoid exposure under high temperature.
• Do not use bleach and strong acid/base liquid for cleaning the chair frame. Avoid contact with water in hardware parts, as corrosion will a ect the service.
ENGLISH