KIKKA BOO PAPPO Instrucciones De Uso página 4

WARNINGS
• Read the instructions carefully before use and keep them for future reference. The child may be hurt if you do not follow these instructions.
• Do not leave the child unattended!
• Make sure the harness is correctly ted!
• Do not use the high chair unless all components are correctly tted and adjusted!
• Do not use the chair near open fair and heating devices!
• Do not use the high chair untill your child start to sit without assistance!
• Do not use the high chair if there is broken, damaged or missing part!
• Always use the chair with a harness system!
• Periodically check the button and harness system for safety!
• Always use the chair on a at even surface!
• Keep the chair away from children when do not use it!
• The chair must not be used as a toy!
• Always ensure that the high chair has been assembled correctly by following the instruction sheet provided! Failure to do so can cause harm to your
child!
• Do not allow your child to stand up whilst in the high chair!
• Ensure your highchair is fully erected before placing your child inside!
• Regularly check all parts for wear or breaks!
• Please keep this manual for further reference!
• Please ensure that the high chair is assembled by an adult!
• Do not use the chair alone, must x to a adult dinner chair with back support!
• Complies with EN16120
I. ASSEMBLING
1. Unfold the packing, unlock the belt.
2. Pull out the sides of the tray to unload it.
3. Press the seat and push behind the back at the same time to fix the back.
4. Put the booster chair on the dinner chair, fix the under safety belt to the bottom of the adult dinner chair, fix the back safety belt to the back of chair.
ATTENTION: Straining the buckle to avoid moving Fix the tray.
6. The safety belt for protect the baby.
7. Adjusting the height of the chair: press and hold the two grey buttons (under the armrest ), then unfold the bracket.
II. FOLDING BOOSTER CHAIR
2. Unfasten the buckle of the under and back, remove your child from the booster chair.
3. Remove the tray: pull out the sides of the tray and pull it upward Fold the booster chair :Press and hold the buttons under back at the same time.
4. Fold the bracket: Reference the picture4,press and hold the two grey buttons (on the middle of the bracket).
5. Put the tray on the back of the chair, and fasten the tray with the safety belt.
6. Fasten the back safety belt then you can carry it.
7. Easy to carry by one hand.
MAINTENANCE
Fabric parts:
1. The fabrics must be cleaned with warm water and mild soap. After cleaning let the crib get completely dry before you use it. If is absolutely forbidden
to fold it and store it before it is completely dry.
2. Do not use strong cleaning agents, bleach or agents with abrasive particles, in order to clean the product. It is forbidden to clean it in a washing
machine, dryer, dry cleaning, bleach and tumble-dry it.
Plastic and metal parts
1. The plastic and metal parts must be cleaned with a damp soft cloth and dried with dry soft cloth.
2. Do not let the product exposed to the harmful e ect of external factors - direct sunlight, rain, snow or wind. This may lead to damage of the metal
and plastic parts and fading of the fabrics .
3. When you are not using the product, store it at a dry and well ventilated place, not in dusty, humid premises with very high or very low room
temperatures.
ENGLISH