Set-Up Instructions - guil ECF20 Manual De Instrucciones

Steps are manufactured with phenolic plywood panel with a non-slip surface and aluminium profile
frame. They have a heavy-duty 300 x 800 mm frame and 4 fixed height legs per step.
Each ECF stair is supplied complete with the connectors needed to attach the step to the stage and
nuts and bolts to fix the steps to each other.

SET-UP INSTRUCTIONS

1.- Firstly assemble the tallest step (the one that will be attached to the platform).
For this step, insert the longest legs into the leg sockets.
1.1.- On the front side, you must only install the provided bolts, washers and nuts as per the
diagram below to secure the legs in place.
1.2.- On the back side, you must also install the connectors that join the stair to the platform,
as per the diagram below.
1 NUT DIN985 M08
2
WASHER DIN127 M08
3 WASHER DIN125 M08
4 NUT DIN934 M10
5 SCREW DIN912 M08X070
www.guil.es - GUIL -
GUIL – ref. ECF
1 SCREW DIN912 M08x55
2 WASHER DIN125 M08
3 WASHER DIN127 M08
4 NUT DIN985 M08
6