Ubbink RobotClean 1 Manual De Instrucciones página 4

CLEAN THE FILTER BAG AFTER EACH CLEANING CYCLE
a. Disconnect the mains adapter from the power supply (see Fig. 1). Ensure that
the plug does not get wet.
b. If the device is in the pool, pull it carefully towards you by the cable until the
handle comes within reach. After most of the water has drained off from the
device, pull the cleaning device out of the pool by the handle attached to the
side or the roller (not the cable).
c. Place the device on a smooth, clean surface and remove the top cover (see
Figs. 2, 3 and 4)
Ubbink Manual Robotclean 1 2015.indd 4
2 3
6
wash all dirt off using a garden hose or into a container (see Figs. 5, 6,
7 and 8). Carefully squeeze out the bag until the water runs clear. You can also
wash the bag in the machine on cold wash WITHOUT WASHING POWDER.
e. Reattach the bag to the holding devices and reattach the top cover onto the
housing (see Fig. 9). Press the cover down until the lock tabs engage.
4
7
4
5
9
8
26.10.15 15:57