Usb Operation - Brigmton BTW-80-CD Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

USB OPERATION

1. Power on the unit and insert a USB Flash Drive (not supplied) into the
USB Port, ensuring the plug is fully inserted at the correct way.
2. Press the MODE button to switch to the USB mode.
3. The tower will play music from the USB automatically.
4. The maximum size of Flash Drive that can be connected is 32GB max.
5. The supported format for USB play is MP3.
AUDIO OPERATION
Use the 3.5mm-RCA Audio cable (included) to connect the unit with Disc
player/MP3 player/phone/computer or other music device.
1. Connect one end of the Audio cable to the R/L Audio-in Jack on the back
panel of the unit, then connect the other end to the MP3 player.
2. Press the MODE button on the top panel or press the AUX1/2 button on
remote to switch to Aux in mode (Aud-1/ Aud-2).
3. Press the AUX1/2 button to enter the Aud-1 mode and start playback by
the device connected to the R/L RCA Jack.
4. Press the AUX1/2 button to enter the Aud-2 mode and start playback by
the device connected to the 3.5mm Aux in Jack.
FM OPERATION
1. Adjust the FM antenna to get the best reception.
2. Press the MO/ST button to turn stereo on.
3. Press the MODE button to switch to the FM mode.
4. Press the
/
button to skip to the previous or next station.
5. Press the
button on remote to tune the frequency by 0.05MHz.
6. Press and hold the
button on remote to skip to strongest station.
7. Press the SEARCH button on the remote control or
on unit to search
the stations, press again to stop searching.
8. Save (60) stations: Press the NUMBER buttons to select the preset
number, then press the F button and input the frequency, at last press the
SAVE button to save the station. E.g. to save the 107.5MHz into preset 36.
Press the NUMBER button 10+, 6, then press F and input 1, 7, 5, 0, at last
press the SAVE button.
Tabla de contenido
loading

Tabla de contenido