Technical Specifications; Technical Support Service And Warranty; Disposal Of Old Electrical Appliances - cecotec SEALVAC 120 STEELCUT Manual De Instrucciones

ENGLISH
4. TROUBLESHOOTING
Problem Possible cause
The product does not turn on. Device is not plugged in.
The cord is damaged.
The bags cannot be vacuum The bag might have an
sealed after suction air leak.
The bag is not placed
in the vacuum chamber
properly.
The sealing strip might be
damaged.
Air leaks in the bag after The bag might be
sealing damaged or there is
something in the opening
of the bag.

5. TECHNICAL SPECIFICATIONS

Product reference: 04256
Product: SealVac 120 SteelCut
Power: 120 W
Voltage: 220-240 V~
Frequency: 50/ 60 Hz
IP X0

6. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimize the recovery and recycling
of the materials they contain and reduce the impact on human health and
the environment.
28 SEALVAC 120 STEELCUT
Solution
Check the cord and reconnect
it properly.
Check the bag carefully. Use
another bag if necessary.
Place the bag into the vacuum
chamber properly.
Check the sealing strip
carefully. If it is damaged,
please the Customer Service
of Cecotec to arrange a
replacement.
Open the bag and wipe
whatever is inside the bag.
Check if the bag has a leak.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to dispose
of the appliance correctly. If the product has a built-in battery or uses batteries, they should be
removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.

7. TECHNICAL SUPPORT SERVICE AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
The product has been disassembled, modified, or repaired by persons, not authorised by the
official Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years, based
on current legislation, except consumable parts. In the event of misuse, the warranty will not
apply.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact Cecotec Technical Support Service at +34 963 210 728.
ENGLISH
SEALVAC 120 STEELCUT 29