Setup As A Tent; Removing The Outer Tent / Rain Roof - Flying tent Manual De Instrucciones

Setup as a tent

F
1. Take the flying tent out of the pack sack
2. Undo the safety strap and the tent floor clips
tent clips .
16
3. Spread the tent out on the floor and tension it by securing it with the tent pegs
ends of the tent (fig. f and g).
4. You can also use the two prefitted guy lines

Removing the outer tent / rain roof

Converting the hammock tent to a hammock with mosquito screen
H
19
The following steps can only be performed as described if you have already set up the flying
tent as a hammock tent or as a tent on the floor.
1. Undo the zipper
10
2. Take the hook and loop fasteners
3. Undo the tent floor clips
4. Take the outer tent clasps
5. Remove the outer tent
You can also remove the outer tent once the tent has been set up on the ground. The steps are
identical.
Pay attention to the color codes on the clips when reattaching the outer tent.
SEtUP and USE
20
7
I
in the middle of the tent.
off of the tent poles
19
on the ends of the tent poles.
12
out of the rear loops
15
(fig. I).
11
G
.
. Connect the tent floor clips with the outer
12
to secure the tent.
20
(fig. h).
8
on the quick release unit.
21
15
5
on both
5