Fm Radio Operation - Trevi CMP 576 DAB Manual De Uso

ENGLISH
DAB/DAB + RADIO OPERATION
SCAN DAB/DAB + RADIO STATIONS
1. Select the DAB source by pressing STANDBY/FUNC. (19) button. The writing Welcome to DAB will appear.
When you switch it on for the first time, the radio will automatically scan and store all the available DAB stations;
2. If you want to repeat the scan operation of the available DAB stations, long press the STOP/MENU/INFO (13) button to access
the DAB menu. Full scan will appear;
3. Press the PLAY/PAUSE/SELECT/SCAN (17) button to start scanning the DAB stations;
4. Press the TUN- (14) or TUN + (16) button to scroll through the various tuned DAB stations. Press the PLAY/PAUSE/SELECT/
SCAN (17) button on the desired DAB station to start playback;
5. Press the STOP/MENU/INFO (13) key several times to display information about the received station.
MENU
1. Long press the STOP/MENU/INFO (13) button to access the DAB menu;
2. Press the TUN- (14) or TUN + (16) button to display the various DAB menu items;
3. Press the PLAY/PAUSE/SELECT/SCAN (17) button to select the displayed menu item:
Full scan: allows you to scan the entire DAB / DAB + band and automatically store the found stations.
Manual tune: allows you to manually scan a single DAB / DAB + frequency. Press the TUN- (14) or TUN + (16) button to select the
channel number for the frequency to be scanned and then press the PLAY/PAUSE/SELECT/SCAN (17) button to start scanning. The
found stations will be automatically stored. At the end, press the STOP/MENU/INFO (13) key for a long time to return to the DAB menu.
DRC: allows you to enable / disable the DRC function to improve the sound while listening in noisy environments. The DRC level can
be set up (high), low (low) or OFF (off).
Prune (Delete): allows you to delete from the list of stations stored all the radio found but not available (poor signal). Move with the
TUN- (14) or TUN + (16) button to Yes and confirm the deletion with the PLAY/PAUSE/SELECT/SCAN (17) button.
System (System): allows access to the system submenu:
Language: it is possible to choose the language of the menus; Italian (default) and English are available.
Factory Reset: allows you to reset the device to the factory settings. At the end of the reset an automatic scan of the DAB / DAB
+ stations will be performed.
SW version (Software version): allows you to view the software version of the device.
STORING RADIO STATIONS
To store a radio station, perform the following steps:
1. Tune to the desired radio station by manual tuning;
2. Press the PROG./MEM./P-MODE (11) button, the display will show PRESET STORE;
3. Use the TUN- (14) or TUN + (16) buttons to select a memory location;
4. Press the PLAY/PAUSE/SELECT/SCAN (17) button to confirm and save the radio station.
Repeat this operation for each radio station you want to save. There are 30 memory locations available.

FM RADIO OPERATION

TUNING IN RADIO STATIONS
1. Press the STANDBY/FUNC. (19) button to choose radio mode: FM mode;
2. Tune to the desired station by pressing TUN- (14) or TUN + (16) button, the station frequency will show on the display;
3. Press the VOLUME + (18) or VOLUME - (20) buttons to adjust the volume to a comfortable level;
4. To optimize reception when listening to stations on the FM band, extend the telescopic antenna (27) to its full length. Gently move
the unit back and forth to get the best reception when you are listening to FM program, or place the unit in an open place. When
the stereo signal is received, the ST. show on the display.
RADIO AUTO SCAN (SEARCH)
1. Press and hold the PLAY/PAUSE/SELECT/SCAN (17) button on unit, the unit will conduct auto scan and program until having
found a strong signal.
2. The unit will start to broadcast from the P01after searching finished, then press the 10/FOLD./MEM - (10) button or 10/FOLD./MEM
+ (12) button to choose the desired stored station.
RADIO STATION MEMORY OPERATION
You may pre-store 30 (FM) radio stations in memory for your preference.
1. Press the TUN- (14) or TUN + (16) keys to manually search for a radio station;
2. Then press PROG./MEM./P-MODE (11) button on unit, "Preset Store" will show on the display;
3. Use the TUN- (14) or TUN + (16) button to choose the desired sequence you want to store;
4. Press the PLAY/PAUSE/SELECT/SCAN (17) button on unit to confirm;
5. Search another station, repeat steps (1) & (2) until all desired stations stored.
NOTE
To obtain the best FM reception, extend and orient the antenna (27). If reception is not good try to adjust the length and orientation of
the antenna differently, however the quality of FM reception depends very much on the place where the device is placed.
The proximity of TV sets, neon lamps or other domestic appliances may cause disturbances in the reception of radio programs, in this
case move the radio recorder away from the disturbing device.
10
CMP 576 DAB