ZUMEX MULTIFRUIT Manual De Usuario página 25

Safety cut-offs
If the locking handle is lifted or the peel bucket removed during operation, the appliance
will automatically stop (for 115V machines only). The appliance will also not work if the cover
and locking handle are assembled without fitting the stainless steel tank.If there is a power
cut whilst the appliance is running, it will not automatically start up again once the power
comes back on. To start up the machine, put the selector and the rear power switch on the "0"
position. After re-connecting it or restoring the electrical power supply, you must start up the
switching on process, retuning to step 1.
To avoid accidents do not manipulate the machine in order to make it work without the
security devices: handle, cover and peel bucket (for 115V machines only).
ATTENTION Whenever there is an emergency stop, once the problem is solved, you must put the speed
selector on Stand By and then select the required speed.
Cleaning
The following are the steps for correctly cleaning the juice extractor:
Step 1 Put the rear switch on "0" and disconnect the machine from the power supply, by
pulling the plug (do no pull the cable).
Step 2 Remove the handle lifting it up from the front. (Fig. 5).
Step 3 Remove the cover lifting it upwards and separate it from the peel bucket. (Fig. 6).
Step 4 Dismantle the anti-drip tap and coaster. (Fig. 7).
Step 5 Dismantle the grater-filter and the stainless steel tank assembly, by pulling the bucket
upwards, following which they should come apart easily. (Fig. 8).
24 Instructions for use English