Mx Onda MX-EG2750 Manual De Usuario página 52

VERY IMPORTANT
The stove and the bottle must always be upright. If you place the cylinder in
a horizontal position it may damage the stove.
When putting on a new cylinder, an ignition can occur since in the cylinder
there may be inert gas. In this case, replace the bottle.
When operating the stove for the first time or after a period of time without
using it, do so in the garden or balcony. After fifteen minutes in operation it
can already be used indoors.
Do not use the gas stove while sleeping.
Do not use the gas stove on high-rise floors or in basements, bathrooms or
bedrooms.
The grill is to prevent the risk of fire, burns or injuries. It should never be
removed from the stove.
USE OF THE GAS STOVE
The stove has a control with four positions: On (Pos. 1), Minimum temperature
(Pos. 2), Average temperature (Pos. 3) and Maximum temperature (Pos. 4).
Ignition of the stove
Press the control button and turn it to the minimum position for 10 seconds,
after this time and while still holding down the control button, press the piezo-
electric ignition button several times until the pilot flame is lit, repeat this
process until Let the pilot flame light up. Once the pilot flame is lit, do not press
the piezo-electric ignition button further and continue pressing the control
button for 20 more seconds, then turn the control button to the desired
temperature position. If the pilot flame goes out, repeat this procedure.
Temperature control
To select the temperature, gently press the control button and turn it to the
desired temperature, low temperature (POS 2), medium temperature (POS 3)
or maximum temperature (POS 4).
Note:
Make sure that when you select a temperature the button is locked (does not
rotate) as it can only be unlocked by pressing down again.
7