Safety Instructions - Powerfix Profi 300278 Instrucciones De Montaje, De Uso Y De Seguridad

Safety instructions

ATTENTION! READ ASSEMBLY INSTRUCTIONS
AND OPERATING INSTRUCTIONS BEFORE USE!
KEEP THE ASSEMBLY INSTRUCTIONS AND
OPERATING INSTRUCTIONS IN A SAFE PLACE!
THE REACH OF CHILDREN.
THIS PRODUCT IS NOT A TOY!
INJURIES MAY OTHERWISE OCCUR!
Ensure that the product is not
subjected to a load greater than
max.
150 kg
150 kg. Otherwise injury and /
or damage to property may occur.
The four castors are to be assembled before
use in accordance with the instructions (see the
chapter „Assembly"). The self-securing nuts
(lock nuts) prevent the screw connections from
loosening, even during a „bumpy" transport.
However, we advise that you inspect them at
regular intervals to ensure that they are tight
and rectify this if required.
After assembling the castors, the tightness of each
individual screw connection is to be examined.
If it is necessary to loosen one or more screw
connections then new lock nuts must be used.
The trolley is exclusively intended for transporting
goods. Transporting people is not permitted.
Assembly
Assemble the castors as depicted in Figure B.
After assembling the castors, the tightness of
each individual screw connection is to be ex-
amined. If it is necessary to loosen one or more
screw connections then new lock nuts must be
used.
Safety instructions / Assembly / Use / Cleaning and care
KEEP OUT OF
Two square tubes and the extendable bow-shaped
handle
Use
Increasing/decreasing the
loading area
You can extend or push together the loading
area . A movable clip
2
accidentally extending from its slid-in position.
To extend the area, firstly loosen the clip
and extend the loading area.
Then, fix the clip to the centre cross brace.
3
To push the area together, loosen the clip
and push the loading area together.
Then, fix the clip into its original position.
3
Folding the handle element
are part of the handle element (see Fig. A).
1
To unlock or to bring the bow-shaped handle
into the horizontal position, first press the pro-
file frame
downwards, then press the bow-
8
shaped handle into the square tubes. Then,
1
fold the handle element forward. Two retaining
springs bring the frame back into the rest position.
In the upright position and in its extended state
the handle element or bow-shaped handle
will audibly click.
Activating/loosening the
locking device
To lock the swivel castors
device downwards with your foot.
7
Loosen the locking device
upwards with your foot.
Cleaning and care
As the profiles of the loading area
have been slid into each other, have a light oil
film upon delivery, refrain from cleaning them
using solvents or by putting them in solvents.
prevents it from
3
3
3
1
1
press the locking
6
by pressing this
7
, which
2
GB/IE 9