Cleaning Or Replacing Gun Liner - Sears CRAFTSMAN Professional 210 AMP MIG Manual Del Operador

4-4. Cleaning Or Replacing Gun Liner

3/8 in
Y Disconnect gun first.
Head Tube
Remove nozzle, contact tip, and
adapter.
Lay gun cable out straight
before installing new liner.
Blow out gun casing.
Tools Needed:
3/8 in
Remove liner.
To Reassemble Gun:
Insert new liner.
Install and tighten wire outlet guide.
Cut liner off 3/4 in (20 mm) (3/8 in
[9.5 mm] for aluminum) from head
tube.
Install adapter, contact tip, and
nozzle.
Ref. ST-800 797-C
OM-194 199 Page 16