Idiomas disponibles
Idiomas disponibles
ENGLISH
This product has been manufactured
following
current
regulations and in compliance with EC
standard. Read this instructions booklet
carefully before installing or starting up
the
product.
It
information on personal and user safety
measures to be followed while installing,
using and carrying out maintenance work
on the equipment. Once the product has
been installed, please hand in this
booklet to the end user. Check that the
apparatus is in perfect condition while
unpacking. Any fault or damage caused
in
origin
is
covered
guarantee. Please make sure that the
apparatus coincides with the product you
have ordered and that the details on the
instructions plate fulfil your necessities.
Transport and manipulation
- The packaging used for this apparatus
has been designed to support normal
transporting conditions. The apparatus
must always be transported in its
original packaging as not doing so
could deform or damage the product.
- The product should be stored in a dry
place
in
its
protected from dust and dirt until it is
installed in its final location. Do not
accept delivery if the apparatus is not
in its original packaging or shows clear
signs of having been manipulated in
any way.
- Do not place heavy weights on the
packed product and avoid knocking or
dropping it.
Important information for the safety of
installers and users
- Installation must only be carried out by
qualified persons.
- Make sure that the installation complies
with each country's current mechanical
and electrical norms.
- Once ready to use, the apparatus must
fulfil the following standards:
technical
safety
contains
important
by
the
S&P
original
packaging,
Standard
Instalments 2006/95/CE
Standard
Compatibility 2004/108/CE.
- Ventilators, or apparatus that include
them, have been designed to move the
air in the area stipulated on their
characteristics plate.
- This apparatus must not be used in
explosive or corrosive atmospheres.
- If a ventilator is going to be installed to
extract air from premises where a
boiler or other combustion apparatus
are installed, make sure that the
building has sufficient air intakes to
assure adequate combustion.
- The extractor outlet must not be
connected to a duct used to exhaust
smoke or fumes from any appliance
that uses gas or any other type of fuel.
- This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory
or mental
capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
Installation
IMPORTANT: Before installing and wiring
the unit, ensure that the main supply is
disconnected.
The SILENTUB is suitable for wall or
ceiling mounting and can either discharge
directly to the outside or via an individual
ducting system.
If the unit is to be installed with individual
ducting, use a standard duct.
Ensure that there are no obstructions to
the airflow and that the impeller turns
freely.
Fix the extractor in such a way that it is
not distorted in order to avoid noise
generation or problems with the rotation
of the impeller. Make sure that the
for
Low
Pressure
for
Electromagnetic
