Harness Adjustment - Crivit SH-2307 Instrucciones De Uso

Adjusting the chin strap
The overall length of the chin strap is adjusted with loop. The length
of the chin strap can also be adjusted with the strap distributor clip.
Be sure the strap distributor is not bothersome. We recommend posi-
tioning it at the end of the ear pad (Fig. C).

Harness adjustment

Use the dial to adjust the helmet to your head size to ensure the hel-
met is seated optimally. Turn the dial to the left to tighten the helmet
harness and to the right to loosen the harness (Fig. D).
Harness height adjustment
The height of the harness system is adjustable. There are 3 different
height adjustments. Pull the connector pin on the harness system out
of the tab locations in the EPS shell (Fig. E).
The pins on the harness system can now be moved to a higher or
lower tab location. Firmly press the pins into the latching points until
you can hear and feel them lock in. Always be sure both pins lock in.
Forehead protection
Flap the additional forehead protection down as necessary (Fig. F).
If you are wearing skiing goggles this offers protections against
incoming wind and cold.
40 GB/MT