Operating Principle - Kremlin Rexson EOS 15-C25 Manual De Uso

1. OPERATING PRINCIPLE

The pump consists of :
 an alternating air motor (B),
 an hydraulic section (C) mechanically coupled to the air motor (B).
The air motor is supplied with compressed air by means of the regulator (D). The pressure is read on the
gauge (E).
During its alternating movement, the air motor drives the piston of the hydraulic section (C), the fluid is
drawn in (L) and forced under pressure in (N).
Due to its design, this pressure is always the one read on the gauge
Example : for a pump ratio 07/1 : 7 x 6 bar = 42 bar / 7 x 87 psi = 609 psi
The spraying air pressure of the gun is adjusted by means of the regulator (knob) (F) and the pressure
can be read on the gauge (G) (Only Airmix model : see figure1).
 To adjust the fluid flow rate, turn the regulator (D).
 To adjust the spraying air, turn the regulator (F) (read on the gauge (G) (Only Airmix model : see
figure 1).
KREMLIN REXSON - 1 - N° : 578.051.120-UK-1510