EINHELL TC-DW 225 Manual De Instrucciones Original página 15

f) Wear suitable work clothes. Do not wear
loose clothing or jewellery. Keep hair, clo-
thes and gloves away from moving parts.
Loose clothing, jewellery or long hair can get
trapped in moving parts.
g) If vacuuming devices and draining de-
vices can be fi tted, make sure that these
are correctly attached and correctly used.
The use of a dust extraction system can redu-
ce the danger posed by dust.
Safety Information for all Applications
a) This electric tool is designed for
use as a grinder/sander and cutting-off
machine. Obey all the safety instructions,
general instructions, illustrations and
data supplied with the tool. If you fail to
obey the following instructions, you may
suff er an electric shock, fi re and/or serious
injuries.
b) This electric tool is not designed for
sanding, working with wire brushes or
polishing. Use of the electric tool in ways it
was not intended could lead to dangerous
situations and injuries.
c) Do not use any accessories which have
not been designed and recommended
by the manufacturer specifi cally for this
electric tool. Just because you can attach an
accessory to your electric tool, this does not
guarantee that you can use it safely.
d) The maximum speed of the plug-in tool
must be at least as high as the maximum
speed specifi ed on the electric tool. Ac-
cessories which rotate faster than the maxi-
mum speed may break and be catapulted out
of the tool.
e) The external diameter and thickness of
the plug-in tool must comply with the
dimension specifi cations of your electric
tool. Plug-in tools of the wrong size cannot
be adequately screened or checked.
f) Grinding wheels, fl anges, grinding disks
or other accessories must fi t precisely on
the grinding spindle of your electric tool.
Plug-in tools which do not fi t exactly on to the
grinding spindle of the electric tool will rotate
irregularly, vibrate a great deal and may result
in you losing control.
g) Do not use damaged plug-in tools. Before
use, check plug-in tools such as
grinding/sanding wheels for splintering
and cracks, grinding/sanding disks for
cracks, wear or heavy wear, and wire bru-
shes for loose or broken wires. If the elec-
Anleitung_TC_DW_225_SPK8.indb 15 Anleitung_TC_DW_225_SPK8.indb 15
GB
tric tool or the plug-in tool is dropped,
check whether it is damaged or use an
undamaged plug-in tool. When you have
checked and fi tted the plug-in tool, make
sure that you and other persons in the
vicinity are not on a level with the rotating
plug-in tool and allow the electric tool to
run for one minute at maximum speed.
Damaged plug-in tools will generally
break during this test time.
h) Wear personal protection equipment. Use
face guards, eye protection or goggles
depending on the application. If reaso-
nable, wear a dust mask, ear protection,
safety gloves or special aprons to keep
small grinding and material particles
away from you. Protect your eyes from fl ying
foreign bodies which may be created by a
range of applications. Dust masks or respi-
ration masks must fi lter the dust generated
by the application. If you are exposed to loud
noise for a lengthy period of time, you may
suff er hearing loss.
i) Ensure that others keep a safe distance
away from where you are working. Any-
body who enters the area must wear
personal protection equipment. Pieces of
the workpiece or broken plug-in tools may be
catapulted into the air and cause injuries even
outside the immediate vicinity of where you
are working.
j) Hold the tool only by the insulated hand-
les when carrying out work during which
the plug-in tool could strike concealed
power cables or its own mains lead. Con-
tact with a live cable will also make the metal
parts of the tool live and will cause an electric
shock.
k) Keep the power cable away from rotating
plug-in tools. If you lose control of the ma-
chine, the mains lead may be cut or caught
and your hand or arm might be pulled into the
rotating plugin tool.
l) Never put the electric tool down until the
plug-in tool has reached a complete
standstill. The rotating plug-in tool may
come into contact with the surface on which
you place it which could result in you losing
control of the electric tool.
m) Never leave the electric tool running
whilst you are carrying it. Your clothing can
come into contact with the rotating plug-in
tool and the plugin tool could thus bore into
your body.
n) Clean the ventilation slots on your elec-
- 15 -
21.02.2018 11:31:07 21.02.2018 11:31:07