TIE DOWN EDM-20 Manual De Propietario

Máquina de accionamiento eléctrico
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Electric Drive Machine Owners Manual
Model 20
Electric Drive Machine
(EDM-20)
• Before installation of any ground anchor, determine that the ground
anchors to be installed will not be near any under ground electrical cables,
phone lines, water lines, sewer pipes, or gas lines. Failure to do so may
result in serious injury or death.
• The Electric Drive Machine (EDM-20) is designed for operation by two people.
• Do not allow the EDM-20 to be wedged against the home or other solid objects,
when operating the EDM.
• Recommended minimum 1500w generator.
• Electrical cords must be a minimum 12-2 cord up to 50', 10-2 cord over 50'.
• Never operate the EDM-20 in wet or rainy conditions.
• Frayed or patched electrical cords should never be used with the EDM.
• Care should be taken to keep electrical cords away from anchors.
• Never operate drive machine without the GFI power cord. Damage to motor and
injury to operator can result from by passing the GFI.
• The Drive Machine electrical box should be opened by trained professionals only.
Opening or altering the electrical supply voids all warranties.
(EDM-20)
Drive Machine
Handle
404-344-0000 • tiedown.com
605 Stonehill Drive SW, Atlanta, GA 30336
Anchor
Adapter Head
Specifications:
Motor: 1/2 Horsepower
RPM:
20
Electric: 110V - 7.35 amps
Torque: 1437 in. lbs.
Instruction #15391 Rev. 7/16/18 (D276)
loading

Resumen de contenidos para TIE DOWN EDM-20

  • Página 1 • The Electric Drive Machine (EDM-20) is designed for operation by two people. Anchor • Do not allow the EDM-20 to be wedged against the home or other solid objects, Adapter Head when operating the EDM.
  • Página 2 Operation Instructions Motor Shaft 1. Attach adapter head to shaft of the EDM motor, Set Screw tighten set screw. Anchor Adapter Head Safety Pin Hole 2. It may not be needed but it is highly recommend to attach the handle extension. Using the handle extension increases stability while reducing muscle strength during installation.
  • Página 3: Power Switch

    Operation Instructions • CALL BEFORE YOU DIG... DIAL 811 Before installation of any ground anchor, determine that the ground anchors to be installed will not be near any under ground electrical cables, phone lines, water lines, sewer pipes, or gas lines. Failure to do so may result in serious injury or death.
  • Página 4 10100 Cord Grip Connector #15788 IDSET Toggle Switch Extension Manufactured Housing Products Division www.tiedown.com • 800-241-1806 • 404-344-0000 ISO 9001:2015 Certification Trade, brand names and drawings are the intellectual property of TIE DOWN. ©2018 TIE DOWN, Inc. D276 (Rev. 7/16/18)
  • Página 5 No hacerlo puede ocasionar lesiones graves o la muerte. • La máquina de accionamiento eléctrico (EDM-20) está diseñada para que Cabezal de adaptador la operen dos personas.
  • Página 6 Instrucciones de operación Eje del motor 1. Acople el cabezal del adaptador al eje del motor de la EDM, ajuste Tornillo de jación el tornillo de fijación. Cabezal de adaptador de ancla Agujero de pasador de seguridad 2. Puede no ser necesario, pero se recomienda encarecidamente acoplar la extensión de la manija.
  • Página 7: Interruptor De Encendido

    Instrucciones de operación • LLAME ANTES DE CAVAR... MARQUE 811 Antes de instalar cualquier ancla en el suelo, determine que las anclas en el suelo a instalarse no estarán cerca de ningún cable eléctrico subterráneo, líneas telefónicas, líneas de agua, líneas de desagüe o líneas de gas.
  • Página 8: Piezas De Repuesto Y Advertencias

    Extensión de interruptor de conmutación #15788 División de productos de encofrado fabricados www.tiedown.com • 800-241-1806 • 404-344-0000 Certificación ISO 9001:2015 La marca, nombres comerciale y esquemas son propiedad intelectual de TIE DOWN ENGINEERING. ©2018 TIE DOWN, Inc. D276 (Rev. 7-16-18)