Clean The Filter; Store The Machine; Troubleshooting; Technical Data - Powerworks XB20V VUG304 Manual Del Operario

EN
3. Turn counterclockwise the filter to seperate the filter
and filter guard.
4. Emptying the dust container and filter contents into
the a waste basket.

11.2 CLEAN THE FILTER

Allow the filter to dry before you store or picking up
debris.
Often clean your filter to maintain peak vac
performance.
Clean a dry filter:
• Cleaning should be done outdoors and not in the
living quarters.
• You can use a small brush to clean the dust and
debris.
• For thorough cleaning of dry filter with fine dust (no
debris), run water through it as described under
"Cleaning A Wet Filter"
Clean a wet filter:
1. Remove the filter from the machine.
2. Run water through the filter from a hose or spigot.
Check the filter for tears or small holes after cleaning.
Do not use a filter with holes or tears in it. Even a
small hole can allow dust to come out of your
machine. Replace it immediately.
12

STORE THE MACHINE

Clean the machine before storage.
1. Remove the battery pack.
2. Let the motor cool.
3. Check that there are no loose or damaged
components. If it is necessary, replace the damaged
components, tighten screws and bolts, or speak to a
person of an approved service center.
4. Store the machine in a cool and dry location.
2
NOTE
NOTE
NOTE
English
13

TROUBLESHOOTING

Problem
The machine
doesn't work.
Dust discharges
from exhaust.
Loss of suction
Static shock
14

TECHNICAL DATA

Voltage
Vacuum speed
Weight (without battery
pack)
Battery model
Charge model
The recommended ambient temperature range:
Item
Machine storage tempera-
ture range
Machine operation tem-
perature range
Battery charging tempera-
ture range
Charger operation temper-
ature range
8
Possible cause Solution
The switch or
Speak to service
motor is defec-
center.
tive.
The filter has Replace the fil-
damage. ter.
The filter isn't in- Properly reinstall
stalled. the filter.
The filter is not Clean or replace
functional. the filter.
Clean or replace
The filter clogs.
the filter.
The hose con- Tighten the hose
nection loose. connection.
Clean or replace
The filter clogs.
the filter.
The collection Empty the col-
tank is full. lection tank.
The hose has Replace the
damage. hose.
Add moisture to
The environment air (if practical,
is dry. use a humidifi-
er).
20 V
22500 RPM
2 lbs. (0.9kg)
BAP702
CAP802
Temperature
-4°F (-20°C) - 158°F
(70°C)
-4°F (-20°C) - 104°F
(40°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 113°F (45°C)