Mounting; Orientation; Rigging - Chauvet DJ EZMIN FX Manual De Usuario

Mounting

Orientation

Rigging

EZMiN™ Laser FX/RBX User Manual Rev. 4
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The EZMiN™ Laser FX/RBX must be mounted in a position that includes planning for
safe laser usage. In addition, make sure adequate ventilation is provided around the
product.
· Before deciding on a location for the product, always make sure there is easy access
to the product for maintenance and programming.
· Make sure that the structure or surface onto which you are mounting the product can
support the product's weight (see the
· When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, such as an elevated platform or a truss.
· When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The double-bracketed yoke has 13-mm holes, which
are appropriate for this purpose.
· The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
· The included flexible tripod serves as a surface support. See
Do not remove the bracket at any time. This product is intended to be used with
its bracket.
Mounting Clamp
Overhead
Mounting
Technical Specifications).
Proper Usage.
Safety Cable
Surface
Support
Page 13 of 52