Dexter 20VIDV2-180.1 Manual De Instrucciones página 204

FR FR
6. OPERATION
ES ES
PT
PT
1. hexagon chuck
IT IT
EL EL
To switch on the tool, press the on/o switch
PL PL
To switch o the tool, release the on/o switch
RU RU
UA KZ
Set the Left/right switch to
UA KZ
RO RO
Change the direction of rotation only when the machine is not in operation !
Caution
Operating the machine with a low speed for a long time will increase the risk that the motor
BR
BR
will be overheated. To prevent overheating, let the motor cool down regularly ( Stop using the
machine for 15 minutes )
EN
EN
CAUTION: Please support and clamp the workpiece properly. Do not use hand to grip or
clamp the workpiece, it may cause injury.
There are three speeds for this machine. Press the round button on the speed display board,
the speed changes accordingly.
The speed display board show:
Light
The rst light is on
The second light is on
The thrid ligt is on
204
1
On/o switch
Left/right switch
shown on the left/righ switch
Set the Left/right switch to
3 speeds adjustment
Light indicators Status
Speed one: 0-1300/min
Speed two:0-2000/min
Speed three:0-2500/min