Drain Valve - BICkayaks Kalyma Manual De Usuario

DETACHABLE SKEG
It is recommended to use the detachable skeg in deep water (lake, sea, ) where
it will allow you to move forward in a straight line. Do not use it in shallow water
or white water: the skeg would deteriorate the bottom of the kayak in shallow
water and reduce the maneuverability in white water. The kayak is equipped
with moulded directional strakes to allow good performance without the skeg.
First partially deflate the kayak. The skeg cannot be installed when the kayak is
fully inflated. The curvature of the skeg must be pointed towards the back end of
the kayak.

DRAIN VALVE

Your kayak has been designed with a drain system located on the underside of
the kayak in the rear. It consists of a fixed base and a screwable cap. Use in
calm waters and to ensure a dry ride: screw the cap closed before putting the
kayak into the water. Use in whitewater: unscrew the cap (and store it safely into
the bag located in the rear of the seat) which allows the kayak to be self- bailing.
ADJUSTABLE SEAT(S)
Your kayak is supplied with a (or several) adjustable seat(s), featuring a
comfortable high backrest. The seat is held in place by the velcro strips on the
underside and by webbing straps on the sides of the backrest. Place the seat(s)
into the kayak, matching the position of the Velcro strips on the floor. Attach the
webbing straps from the sides of the backrest to the D-rings located inside the
kayak, on the side walls/chambers. Tighten the straps as needed for proper
back support. You can choose the seat position for one or two persons: please
see the drawing.
Before Assembly
Closed
Before Assembly
5
After Assembly
Opened
After Assembly